VPN - Cisco AnyConnect Start Before Login Module

This article outlines the process of connecting up to VPN prior to login. This is primarily used when sending equipment out where a user could not login to populate accounts.

Requirements:

To use the VPN Before Login Module, you must be using a computer that is:

  • Running Windows 10 (SCCM Template)
  • Supported by ITServices [has an Asset or Service tag]
  • Connected to the internet (wired/wireless)

Tech Instructions:

Currently, the installer is not automatically deployed to workstations so a manual install prior to the machine leaving the campus is required.

Installer can be found here:

  • \\n13.ok.ubc.ca\SIRVOL\ITServices\Installs\PC\Cisco
  • There are two installer folders
    • Cisco AnyConnect Start Before Login Module
    • Cisco_AnyConnect_Secure_Mobility_Client_with_Umbrella_and_Connect_Before_Login

For now, please use the one without Umbrella.

User Instructions:

To connect to VPN prior to login, please follow the following instructions:

 

 
For more information or assistance, please contact the ITServices Helpdesk - 250.807.9000 or 855.807.9001.
Posted by: - Wed, Apr 1, 2020 at 11:29 AM. This article has been viewed 19008 times.
Online URL: https://knowit.ok.ubc.ca/article/vpn-cisco-anyconnect-start-before-login-module-1026.html

Powered by PHPKB (Knowledge Base Software)